Performance

Comparative Performance Chart

Points to keep in mind

  • With other single & double wall vanes: every sixth vane must be welded to the runner for ducts running at 1000 fpm or over (or install tie rods through the center)
  • Other double wall vanes: there is no positive fastening of the blades to the runner. The vanes are either tabbed or inserted into slotted dimples. This leaves the possibility of rattling or detaching
  • The H-E-P vane: provides two tie rods through each blade; with fasteners (nails) that don't slip. H-E-P is formed from a single piece of 26 gauge hot dipped galvanized steel. No sharp leading edge to catch dirt or lint
© 2007 Designed & Developed by ASJ Company