|
How High Efficiency Profile Benefits Contractors
 Contractors
who have used AeroDyne blades like it because they are:
- Easy and Quick to Install
- Blades are fixed structurally and never
detatch
- Same blades for every elbow size
- Easy to adjust blade angle in field
- Never rattles or detaches
- No callbacks
H-E-P turning vanes are for jobs when
the quality and performance has to be good. They are not the cheapest
vanes you can find, but their performance and installation advantages provide
the lowest life cycle cost for your customer.
A narrow
strip (approx. 3/4 inch) is sheared from the center of both top and bottom
side rail pieces. Vanes are attached to them by the usual method of driving
fasteners through the slots. All of the vanes in the assembly then move
together as the correct alignment is made for the elbow, maintaining the
leading and trailing edges in an exactly parallel relationship.
Summary
of benefits and capabilities include:
- Low
pressure loss to the lowest attainable level
- Formed
from ONE piece of galvanized hot dipped prime carbon steel -
25-30% Recycled Steel
- Provides
a permanent rattle proof assembly
- Smoothly-rounded
entry nose with extended trailing edge, no collection
of dirt or debris. Provides a Cleaner Duct environment
- Design
prevents distortion and fluttering under airflow.
- Design
geometry adapts perfectly to all duct sizes
- Positive
Assembly - secure for a perfect stay put-fit. No rattle
– No detaching
- Easy
& Quick Assembly – Fastener is simply driven thru a pre-punched
side rail slot and into the continuous tubular channel in vane, this
exclusive method provides a rigid permanently rattle proof assembly.
- This
Airfoil Design gives superior energy savings, low impact losses,
low pressure drop, with dramatically reduced sound power levels
Here are the 4 easy steps to incorporating
AeroDyne's high efficiency profile turning vanes.
Step 1. Estimating
Estimating is easy. Click here to estimate
the cost. If you need help, contact us or our dealer and we would be happy to assist
you.
Step 2. Submittals
Just click here to get the online Submittal/Order
form and submit to the engineer. Engineers who have specified our
product by name know its quality and the approval process should be a breeze.
Step 3. Ordering
To order, fill out the attached takeoff
spreadsheet and Order form and email to the
distributor near you. If you cannot find our distributor, then
email us..
Step 4. Installation
Installation can be done in the sheet metal shop or in the field.
The blades are shipped to you in 10 foot lengths. You cut them with
normal sheet metal cutting tools in your shop or in the field for the height
of the elbow.
No
other product on the market has the same structural design and capability.
|
